Patient Monitor UM-500
A new generation of patient monitors. UM-500 allows to provide continuous monitoring of patient whenever it is necessary. There is no need to buy anesthesia or transport monitor as UM-500 combines all these features. Integrated telemetry module that is transported together with a patient enables continuous monitoring during the whole treatment period wherever a patient is.
UM-500 Patient Monitor consists of the Mobile Measurement Module MM-500 and Extension
Measurement Module EM-500, integrated with bright 15’’ or 19’’ displays. The MM-
500 includes the most consistently required monitoring parameters in a single unit and can
accompany the patient from the bedside and throughout the hospital. During transport MM-500
displays patient monitoring information on built-in 7’’ touch screen. Extension Measurement
Module with UniPort technology offers a wide choice of monitoring parameters.
- • Unique networking capacity which allows viewing hospital network data, digital images,
lab results, medication guidelines, bed-to-bed viewing etc;
• Remote access to patient information using mobile phone, PC or PDA;
• High brightness, wide viewing angle, color 15' 0r 19’’' displays;
• Expanded monitoring capabilities: ECG, HR, Pulse Oximetry, NIBP, Respiration Rate,
Temperature, Invasive blood pressure, Cardiac output, CO2, N2O, O2 and 5 anesthetic
agents, BIS monitoring;
• Simultaneous display of up to 15 real-time waveforms;
• Two modes of numeric visualization – Standard and Large Numbers;
• User-friendly touch screen interface;
• Advanced digital signal processing;
• Alarm supervision of all vital signs;
• Multi-level alarm management;
• 12-lead ECG analysis;
• Arrhythmia and ST segment analysis;
• Heart rate variability analysis;
• Up to 240 hours trend for all measured values;
• 60 seconds full-disclosure waveforms review;
• Up to 4 hours of internal battery operation;
• Drug dose and infusion rate calculator;
• Touch screen and rotary knob control;
• UniPort connectors automatically detect the type of connected sensor;
• Different mounting solutions.
-
|
Display
|
|
Size:
|
15'' or 19’’ diagonal
|
|
Type:
|
Bright color TFT
|
|
Resolution:
|
1024x768 dots
|
|
Number of traces:
|
up to 15, user selectable
|
|
ECG
|
|
Leads:
|
I, II, III, aVR, aVL, aVF, V1-V6
|
|
Sweep speed:
|
6.25; 12.5; 25 and 50 mm/sec
|
|
Sensitivity:
|
5;10;20 mm/mV
|
|
Defibrillator and coagulator protection
Pacemaker detection, arrhythmia and ST segment analysis
|
|
|
|
Heart Rate
|
|
Range:
|
15 - 350 BPM
|
|
Accuracy:
|
± 1 BPM
|
|
|
|
|
|
SpO2
|
|
Range:
|
1 - 100%
|
|
Resolution:
|
1%
|
|
Pulse rate range:
|
15 - 350 BPM
|
|
Accuracy
|
± 2% (70-100%) 3% (40-70%)
|
|
Probes:
|
Adult, neonatal
|
|
Accuracy:
|
± 2 BPM
|
|
|
|
Temperature
|
|
Number of channels:
|
1 or 2
|
|
Range:
|
0 - 45°C
|
|
Accuracy:
|
± 0.1°C (30-42 C)
|
|
Probes:
|
YSI 400 (Rectal, skin)
|
|
Respiration Rate
|
|
Method:
|
impedance
|
|
Range:
|
0 – 150 1/min
|
|
Accuracy:
|
± 1/min
|
|
Apnea time interval
|
Yes, user selectable
|
|
|
|
NIBP (systolic, diastolic and mean)
|
|
Method:
|
oscillometric
|
|
Range:
|
adult: 10-280 mmHg
neonatal: 10-140 mmHg
|
|
Accuracy:
|
± 3 mmHg
|
|
Mode:
|
manual, automatic, STAT, Venous Puncture
|
|
Cuffs:
|
adult, pediatric or neonatal.
|
|
|
|
Invasive Blood Pressure
|
|
Number of channels:
|
up to 4
|
|
Range:
|
-40 – 300 mmHg
|
|
Accuracy:
|
± 1mmHg
|
|
Transducer sensitivity:
|
5.0 µV/V/mmHg
|
|
|
|
|
Cardiac Output
|
|
Method:
|
Thermodilution
|
|
Range:
|
0.1 - 20 l/min
|
|
Accuracy:
|
± 0.1 l/ min
|
|
Display:
|
Cardiac output, cardiac index, hemodynamic profile
|
|
Resolution:
|
0.1 l/ min
|
|
EtСО2 (mainstream and sidestream)
|
|
Method:
|
Nondispersive IR absorption
|
|
Range:
|
0 - 150 mmHg
|
|
Accuracy:
|
± 2 mmHg (within range: 0–40 mmHg)
|
|
Respiration rate range:
|
0-150 1/min
|
|
Multi-Gas Module
|
|
Method
|
Infrared absorption
|
|
Gas
|
CO2 , N2O, O2 , Hal, Iso, Des, Enf, Sev
|
|
Oxygen Sensor
|
galvanic or paramagnetic
|
|
Range:
|
|
|
O2
|
0 - 100%
|
|
CO2
|
0 - 25%
|
|
N2O
|
0 - 100%
|
|
Hal, Iso
|
0 - 8%
|
|
Enf, Sev
|
0 - 10%
|
|
Des
|
0 - 20%
|
|
BIS Monitoring
|
|
|
Method:
|
EEG complex processing
|
|
BIS-index range:
|
0 -100
|
|
Signal quality index (SQI):
|
0 -100%
|
|
Impedance range:
|
0 - 999 kOhm
|
|
Bandpass EEG:
|
0.25 -100 Hz
|
|
EEG channel
|
|
|
Channels:
|
5 |
|
Bandwidth:
|
0,25 -100 Hz
|
|
Noise level:
|
< 0,3 μV
|
|
Impedance measurement range:
|
0 - 999 kOhm
|
|
Electrode-to-skin impedances are continuously measured
|
|
|
Recorder
|
|
Paper width:
|
58 mm
|
|
Speed:
|
12.5; 25; 50 mm/sec
|
|
Formats:
|
Waveforms, graphs and tables
|
|
Trace:
|
2 or 3
|
|
|
Power supply:
|
- AC 220 V, 50 Hz
- Internal battery(4 h operation)
|
|
Output:
|
LAN Ethenet, WLAN WiFi. USB, RS232,
Memory Card, VGA, HDMI, Sync Def,
Sync IABP
|
|
Dimensions:
|
420х350х160 mm
|
|
Weight:
|
5.5 kg (battery included)
|
•
Unique networking capacity which allows viewing hospital network data, digital images,
lab results, medication guidelines, bed-to-bed viewing etc;
Remote access to patient information using mobile phone, PC or PDA;
High brightness, wide viewing angle, color 15' 0r 19’’' displays;
Expanded monitoring capabilities: ECG, HR, Pulse Oximetry, NIBP, Respiration Rate,
Temperature, Invasive blood pressure, Cardiac output, CO2, N2O, O2 and 5 anesthetic
agents, BIS monitoring;
•
•
•
Simultaneous display of up to 15 real-time waveforms;
•
•
Two modes of numeric visualization – Standard and Large Numbers;
•
User-friendly touch screen interface;
•
Advanced digital signal processing;
•
Alarm supervision of all vital signs;
Multi-level alarm management;
•
•
12-lead ECG analysis;
•
Arrhythmia and ST segment analysis;
•
Heart rate variability analysis;
Up to 240 hours trend for all measured values;
•
•
60 seconds full-disclosure waveforms review;
•
Up to 4 hours of internal battery operation;
•
Drug dose and infusion rate calculator;
•
Touch screen and rotary knob control;
UniPort connectors automatically detect the type of connected sensor;
•
•
Different mounting solutions.
|
