Patient Monitors UM 300 - 15
  • en
UTAS Co.

UM 300-15

New level of continuous monitoring and uninterrupted surveillance at all stages of patient care.

  • Most effective configuration of monitoring in one device - ultra slim touch screen (15") for ICU, OR
  • Universal UniPort™ connectors  technologies - extended set of compact measuring modules (modules-in-cable) connected to the monitor and automatically detect a type of connected sensor
  • Plug-and-play – maximum flexibility and quick readiness for all new clinical situations
  • Ultra functional slim design - only 5 cm depth
  • Unique networking capacity
  • Remote access to vital patient information directly from PC, PDA or mobile phone (UniViewer)
  • Print directly from patient monitor — UM 300 allows to generate report form and save it to USB drive or print on USB connected or network printers.

 

  um banner brochure EN

 

UM 300-15 Patient Monitor with 15" display is optimal solution for stationary installation in all areas of the hospital where it’s needed.

  • Wide range of parameters in basic configuration
  • Extended monitoring parameters that easy to add and set up
  • Reliable and high quality measurement
  • Seamless patient monitoring
  • User-friendly interface
  • Efficient design
  • Easy to observe sanitary standards

Innovative features:

  • Connection with UNET™ Central Monitoring Station provides continuous gap-free monitoring, patients databases maintenance and remote control access to vital data.
  • UniScreen™ — extended monitoring on two individually customizable screens.
  • UniViewer — remote access to patient information using mobile devices (via UNET™).
  • Bed-To-Bed Viewer — get access to patient data from one monitor on any other UM 300 monitor in the hospital network (via UNET™).
  • PDF report generation with the ability to save data to an external USB flash drive and / or print to a network printer.

Features:

  • TFT display, touch screen, 15" display
  • 5 cm (2") depth only
  • UniPort™ universal connector technology for easy extend the functionality of basic model
  • Built-in WiFi module
  • Automatic switch from wire to wireless connection
  • OxiCRG
  • ECG analysis: ST-segment analysis, arrhythmia analysis, QTc analysis, Heart Rate Variability
  • 3 display modes: Standard, Large Numbers, Mini-trends
  • Drug dose and infusion rate, Ventilation, Oxygenation and Hemodynamic calculators
  • Simultaneous display of more than 12 real-time waveforms
  • Individual screen settings (user profiles)
  • Adjustable “hot” keys
  • Onboard memory - up to 720 hours trends for all monitored parameters
  • Wide-viewing light alarm indicator (up to 360°)
  • PDF report generation with the ability to save data to an external USB flash drive and / or print to a network printer
  • Ability to save data, such as trends and waveforms, on a USB flash drive
  • Additional external display
  • Convenient carrying handle
  • Multifunctional monitor mount system
  • Internal rechargeable battery

Basic integrated set of monitored parameters:

  • ECG
  • respiration rate
  • SpO2 using Masimo SET® or Nellcor OxiMax™ technology
  • NIBP — SMART NIBP technology
  • body temperature (2 channels)
  • CO2 (main- or sidestream)

*Please check the actual content of the basic set in the sales department.

Extended set of monitored parameters, connected via UniPort™ technology:

  • IBP (up to 4 channels)
  • 12-leads ECG
  • N2O, СО2, Hal, Iso, Enf, Sev, Des / О2 (main-or sidestream)
  • Monitoring of depth of anesthesia (BIS-module), EEG
  • Measurement of the main hemodynamic parameters using a thermodilution technique (CO)
  • Non-invasive monitoring of central hemodynamic parameters by ICG
  • Monitoring of the level of neuromuscular activity (NMT).
  • and Amplitude-integrated electroencephalography (aEEG) via USB.

Features:

  • TFT display, touch screen, 15" display
  • 5 cm (2") depth only
  • Unique networking capacity:
    • Bed-To-Bed Viewer
    • Web Viewer
    • Connection with Central station UNET™
  • Remote access to patient information
  • UniPort™ multipurpose connectors technology
  • Plug-and-play technology
  • Built-in WiFi module 
  • Automatic switch from wire to wireless connection
  • OxiCRG
  • 12-leads ECG, ST-segment analysis, arrhythmia analysis
  • 3 display modes: Standard, Large Numbers, Mini-trends
  • Heart Rate Variability
  • Drug dose and infusion rate, Ventilation, Oxygenation and Hemodynamic calculators
  • Measuring of patient's metabolism and energy-requirement (energy metabolism) (optional)
  • Simultaneous display of more than 12 real-time waveforms
  • Individual screen settings (user profiles)
  • Soft-keys
  • Onboard memory - up to 720 hours trends for all monitored parameters
  • Wide-viewing light alarm indicator (up to 360°)
  • Port for SD-card for storing volume and trends
  • Additional external display
  • Remote controller
  • Built-in handle
  • Multifunctional monitor mount system
  • Internal rechargeable battery.

UM 300-10 Interface

 

 

UM 300-10 Interface

 

 

UM 300-10 Interface

 

 

UM 300-10 Interface

 

UniPortMultipurpose connectors technology allows to create the most effective monitoring configuration  – not more and not less as it’s necessary in each clincal case.

UniPort™ Technology allows to configure the UM 300 Patient Monitor with additional mondules as easy as plug-and-play. 

Uniport modules can be easiliy monted to the motinor with built in rail clamp. Patient transportation got easier with simple and useful  module's mounting solution.

 

UniPort modules

 

UM 300 Patient Monitors have expanded monitoring capabilities. Extended set of monitored parameters, connected by UniPort™ technology:

13ADA 1849
  • IBP (up to 4 channels)
  • 12-leads ECG
  • N2O, СО 2, Hal, Iso, Enf, Sev, Des/О (main- or sidestream)
  • Monitoring of depth of anesthesia (BIS-module), EEG
  • Measurement of the main hemodynamic parameters using a thermodilution technique (CO)
  • Non-invasive monitoring of central hemodynamic parameters by ICG
  • Measurement of central hemodynamic parameters with PiCCO™ technology
  • Monitoring of respiratory mechanics parameters
  • Monitoring of the level of neuromuscular activity (NMT).

A wide range of modules-in-cable provides an opportunity for hospital to purchase patient monitors and additional functions exactly in the amount which is necessary at the moment and expand the functionality of the existing monitors in the future, purchasing required the modules-in-cable only.

Remote access to patient’s data in trends or real-time mode, while you are away from the bedside. 

Clinicians can quickly check patient’s status directly from a standard PC, Mac or tablet PC,awireless, pocket-sized Personal Digital Assistant (PDA) or smartphone.

With the UniViewer you can quickly check the status of your patients directly from your PC without making a trip to the bedside or even to the hospital.

UniViewer is capable of displaying real time patient monitoring data such as waveforms, alarms and numeric including printing facilities. UniViewer can use any type of technology: wire, wireless, mobile.

UniViewer software adds web-enabling capability to the Central station UNET™. Now, physicianscan quickly and easily access current vital patient data from remote locations or anywhere that has internet access.

UniViewer allows physicians to remotely interact with on-site clinical staff, reducing delays in diagnosing patients, saving time and increasing productivity.

Слой 8

Features:

  • Multi-patient view capability -- view real-time streaming waveforms for any patient on the network bycentral station
  • Access patient data from any Central station UNET™ on your network using browser
  • Auto adjust according to screen size
  • User authorization
  • Configure administrative privileges, controls and functions
  • User Management function allows administrator to add, define and manage users
  • Event List
  • Graphic Trends.

High profile patient monitoring - another monitoring just does not make any sense.

UniView solution is based on an advanced web technologies that provides a number of advantages of this product in comparison with the others:
  • no hardware requirements;
  • requirements only for web browser;
  • easy to upgrade software;
  • flexible and scalable system.

buklet maket mon2

UTAS UniViewer patient continuous universal monitoring solution suggests complete and flexible solution of monitoring tasks at all stages of patient management, both in the acute phase of treatment and during recovery.

Hospital monitoring system is constructed directly by the user in a clinical department depending on the required scope of monitoring by selecting one or combining several devices:

  • Patient monitor UM 300-20 (display 20")
  • Patient monitor UM 300-15 (display 15")
  • Portable patient monitor UM 300-10 (Display 10")
  • Expanded functions modules
  • Central station UNET™.
Continuous access to the patient database is provided by:
  • Bed-to-bed Viewer - review of monitored parameters from one UM series patient network monitor on any other network monitor
  • UniViewer - remote access to the monitored patient parameters from any network monitor in real time mode or in trends.

Using UniViewer system the monitored patient information is continuous and stored in a single database and doctors can quickly assess the patient status even in remote mode.